Friday 6 August 2021

JAI 566 Just add a frame - Pinwheel tower card

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.
Hello & welcome. Today I'm sharing a new to me 3d fancy fold card that makes me very happy and hope that it makes the recipient smile too. This is my Design Team project for this week's Just Add Ink challenge - Just Add a Frame.

I haven't made many 3d & fancy fold cards lately but when I spotted the lovely Patty Bennett's Pinwheel Tower cards & tutorial, I knew it would be perfect to send to a dear friend who also loves a fancy fold. It's surprisingly easy to make, especially thanks to Patty's tips. I adapted the size of my card to work better with A4 card & metric measurements. It's approx 21cm x 14.5cm folded flat.

I've used lots of my current & new fave stamps and dies to make it, including the Biggest Wish stamp set, Stitched Greenery die and Pierced Blooms dies. If you've seen my recent cards, you'll have spotted some too. 

This is a super photo heavy post so let's get started with a look at the finished card.

The brilliant thing about pinwheel cards is you have 8 sections to decorate. This is the front of the card when open. The colours are Coastal Cabana, Polished Pink, Pale Papaya, Night of Navy, Pear Pizzazz, Basic White, and gold. The stamped sentiments are Soft Sea Foam and Night of Navy.
 

I considered this opening view as the front. The card is quite thick when flat so this is the only section where I've popped up and layered elements. The front set the scene to carry themes through the card.

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

Here are sections 2, 3, & 4. Each has it's own look while maintaining continuity of elements across the whole. Read on below for more info about each section. 

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

Here's a more upright view so you can why it's called a pinwheel card (or it could be a windmill card too).

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

Amazingly, only 4 pieces make up the basic card. A long piece that's scored to make the square centre and 1 vane of the pinwheel, and 3 rectangle pieces that attach to the centre to make the remaining 3 vanes. Patty shows this very well in her video.

Card Design Breakdown

As I mentioned above, the card folds flat for posting. This version is approx 21cm x 14.5cm flat and fits a C5 envelope (normally used for half A4 sheets). Here's how each side looks flat and some notes about the design. 

Section 1 - Front

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

This is how the recipient will see the card when it comes out of the envelope. Note that you can see the whole of the smaller left panel plus part of the next page, so bear that in mind when you're choosing colours & elements for your version.

These are the main elements used on the front and throughout the card:

  • Raised frame using the Stitched Greenery die & Stitched Rectangle dies.
  • 'Thanks friend' sentiment from my most used current stamp set, Biggest Wish, teamed with the largest Tailor Made Tags die. If Biggest Wish is not on your shopping list yet, you must add it now as it's so fun & flexible for so many people & occasions. (See all my other Biggest Wish cards here if you need more convincing).
  • Die cut flowers cut from the Pierced Blooms die set. I love, love, love these dies. There are so many shapes included for you to mix and match. 
  • Gold foil frame & leaf elements from the Expressions in Ink Ephemera pack. I love how they delicately contrast with the bold flowers.

Section 2:

I used 2 paper prints from the Brights Collection stack (Coastal Cabana & Melon Mambo) here, plus a sentiment from the Pansy Patch stamp set combined with the large 'friend' image from Biggest Wish.  

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

Section 3:

I included another stitched frame and gold foil hexagon frame & leaf elements from the Expressions in Ink Ephemera pack and another sentiment from the Pansy Patch stamp set.

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

Section 4:

The final section includes another stitched frame, blank this time for a personal message.

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

So that's my frame challenge project. Check out all our Design Team Projects on the Just Add Ink blog and play along with the challenge too.

I hope you've enjoyed seeing my first Pinwheel Tower card and are inspired to make your own. Please leave me a comment if you do like it, and if you'd like more information about how I made my version.

See and shop all the supplies I've used here on my Stampin' Up Store.

I have some more Pierced Blooms cards to share with you soon so keep an eye out for those.

Happy stamping & inky wishes,
Di

Handmade 3d fancy fold pinwheel tower card. Made by Stampin' Up! supplies: Biggest Wish - Pierced Blooms dies, Tailored Tags dies, Rectangle Stitched Dies,  Stitched Greenery die. Card by Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper.

 
Stampin Up 2021 Mini Catalogue & Sale-a-bration Catalogues. Available from 3 August 2021. Di Barnes - Independent Demonstrator in Sydney Australia - colourmehappy - sydneystamper

2 comments:

Tina said...

OMG, Di! What a gorgeous card! The colours are wonderful - the whole card is so bright and cheerful. I'm sure that your friend will love it!

ColourmehappyDi said...

Thanks heaps, Tina. It was fun to make & the recipient did love it. That makes it all worthwhile.
Di